INLINE is a profile for LED strips with a maximum width of 10 mm. The profile is made of high-quality anodized aluminum and is 2 meters long. It is a product that is mounted on the groove, i.e. H. On a properly made hole or mill in the mounting surface, e.g. B. in a furniture panel. The depth of the mounting hole is 9 x 14 mm + the total length of the selected section of the profile.
The profile looks very discreet and elegant during assembly. Works great for both furniture and regips!
Available in two options:
with attachable transparent shade
or with pressed milk bowl (so-called opal)
You can buy end caps for profiles that are attached to the beginning and end of the profile to finish it off in a beautiful and aesthetic way. Caps prevent dust and moisture from getting into the LED strip that is mounted in the profile.
It is worth investing in LED profiles, as these extend the life of the LED strip, as aluminum dissipates heat well, which means that the strip heats up much less and can shine for much longer.
Profile available without LED strips (strips can be purchased separately in our shop).
Degree of protection: IP20
Diameter of the mounting hole: 9 mm x 14 mm
Location of the product: Indoor use in a dry room .
Material: Aluminum profile / Plexiglas cover
Profile length: 2 m (2000 mm)
Maximum width of the LED strip: 10 mm
Light source included: NO (must be bought)